Table name: VISIT_DETAIL
This table will be populated from six source tables, FACILITY_HEADER, INPATIENT_ADMISSIONS, INPATIENT_SERVICES, OUTPATIENT_SERVICES, LONG_TERM_CARE and DRUG_CLAIMS.
Record level referential integrity with source
Record level referential integrity is important for drug utilization and health economics analysis. Records from the source will be preserved to the best of our ability in the CDM. The records in the INPATIENT_SERVICES and OUTPATIENT_SERVICES tables are allowed to be duplicated (because there maybe multiple charges on a single claim line or there mabye multiple standard costs listed).
While creating records in the VISIT_DETAIL table the duplicate claim lines will not be consolidated. Any duplicate procedures or diagnoses resulting from the duplicated claim lines will not affect analysis. See the PROCEDURE_OCCURRENCE table for how to use procedure units. The charges and costs will be preserved in the COST table, creating a 1:many relationship between the COST table and the VISIT_DETAIL table. See logic below for details.
The VISIT_DETAIL table will have 1:1 record level referential integrity to FACILITY_HEADER, INPATIENT_ADMISSIONS, INPATIENT_SERVICES, OUTPATIENT_SERVICES, LONG_TERM_CARE and DRUG_CLAIMS - except as noted below.
Special notes
- VISIT_DETAIL.VISIT_OCCURRENCE_ID, a system generated primary key of the VISIT_DETAIL will be the fk to many OMOP tables including domain-tables (CONDITION_OCCURRENCE, PROCEDURE_OCCURRENCE, OBSERVATION, MEASUREMENT, DRUG_EXPOSURE, etc.) and to COST table COST.COST_EVENT_ID).
- VISIT_OCCURRENCE will be generated from VISIT_DETAIL table through an ‘era’ logic where inpatient records will be grouped together into continous non-overlapping periods, and all VISIT_DETAIL records (inpatient, outpatient, other) that are in that temporal non overlapping continous period will be considered one visit_occurrence_id record. For records outside this non-overlapping inpatient period, we will take all outpatient records and identify unique person-date combinations. For each unique person-date combination a visit_occurrence_id will be assigned and all visit_detail_id records temporally assocciated with that person-date combination will be assigned that visit_occurrence_id. (See documentation for VISIT_OCCURRENCE.visit_occurrence_id)
- Linkages across source tables should use the combination of ENROLID and HLTHPLAN.
VISIT_DETAIL Logic
- Remove persons not in PERSON table
- Create a primary key to identify each record in the FACILITY_HEADER, INPATIENT_ADMISSIONS, INPATIENT_SERVICES, OUTPATIENT_SERVICES, and DRUG_CLAIMS tables. This primary key will become the VISIT_DETAIL_ID. Retain this information as a lookup table for later linkage of diagnoses and procedures. This system generated key may also be used to lookup records in source table i.e. maintain a lookup table that is able to link visit_detail_id to the records of FACILITY_HEADER, INPATIENT_ADMISSIONS, INPATIENT_SERVICES, OUTPATIENT_SERVICES, and DRUG_CLAIMS tables (record level referential integerity).
- If a VISIT_DETAIL record starts before the observation period, trim the start date to beginning of observation period.
- Only create VISIT_DETAIL records for DRUG_CLAIMS records that are not mail-in pharmacy (RXMR <> 2)
This MS Excel file provides two examples for defining VISIT_DETAIL.
PROVIDER_ID Assignment Logic
- For records from FACILITY_HEADER, INPATIENT_ADMISSIONS, INPATIENT_SERVICES, OUTPATIENT_SERVICES, and LONG_TERM_CARE:
- Each record has a provider value in the PROVID AND STDPROV field. Use this to | ook up the PROVIDER_ID from the PROVIDER table using PROVID as the PROVIDER_SOURCE_VALUE and STDPROV as the SPECIALITY_SOURCE_VALUE.
- Each record has a provider value in the PROVID AND STDPROV field. Use this to | ook up the PROVIDER_ID from the PROVIDER table using PROVID as the PROVIDER_SOURCE_VALUE and STDPROV as the SPECIALITY_SOURCE_VALUE.
Reading from OUTPATIENT_SERVICES
| Destination Field | Source field | Logic | Comment field |
|---|---|---|---|
| VISIT_DETAIL_ID | - | System generated. | - |
| PERSON_ID | ENROLID | - | |
| VISIT_DETAIL_CONCEPT_ID | STDPLAC | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 9202 (Outpatient Visit). | NOTE: The STDPLAC value in OUTPATIENT_SERVICES is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 |
| VISIT_DETAIL_START_DATE | SVCDATE | NULL | - |
| VISIT_DETAIL_START_DATETIME | SVCDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_END_DATE | TSVCDAT (See Logic column for exceptions) | If STDPLAC is blank, NULL, does not have a mapping or is equal to 02, 08, 17, 53, 57, 71, 72, 11, 01, 95, 12, 20, 49, 60, 15, 81, 42, 41, 14, 04, 18, 09, 03, 65 or 16 then set visit_detail_end_date equal to visit_detail_start_date. If STDPLAC is equal to 23, 24, 19, 25, 50, 62 and TSVCDAT - SVCDATE > 1 then set visit_detail_end_date equal to visit_detail_start_date If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 | - |
| VISIT_DETAIL_END_DATETIME | VISIT_DETAIL_END_DATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_TYPE_CONCEPT_ID | - | Set all to 32860 (Outpatient claim detail) | - |
| PROVIDER_ID | PROVID STDPROV | Look up the PROVIDER_ID from the PROVIDER table using PROVID as the PROVIDER_SOURCE_VALUE and STDPROV as the SPECIALITY_SOURCE_VALUE | If there is no associated PROVIDER_ID this should be NULL, not 0 |
| CARE_SITE_ID | - | NULL | - |
| VISIT_DETAIL_SOURCE_VALUE | STPLAC | - | |
| VISIT_DETAIL_SOURCE_CONCEPT_ID | STDPLAC | Use the Source-to-Source Query with the filter WHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_VOCABULARY_ID IN ('CMS Place of Service’) If no map is made, assign to 0. | NOTE: The STDPLAC value in OUTPATIENT_SERVICES is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. |
| ADMITTING_SOURCE_VALUE | - | NULL | - |
| ADMITTING_SOURCE_CONCEPT_ID | - | 0 | - |
| DISCHARGE_TO_SOURCE_VALUE | - | NULL | - |
| DISCHARGE_TO_CONCEPT_ID | - | 0 | - |
| PRECEDING_VISIT_DETAIL_ID | - | NULL | - |
| VISIT_DETAIL_PARENT_ID | - | NULL | - |
| VISIT_OCCURRENCE_ID | - | VISIT_OCCURRENCE.VISIT_OCCURRENCE_ID This is the VISIT_OCCURRENCE_ID for the VISIT_OCCURRENCE record that is the parent for the VISIT_DETAIL record | - |
Reading from INPATIENT_SERVICES
| Destination Field | Source field | Logic | Comment field |
|---|---|---|---|
| VISIT_DETAIL_ID | - | System generated. | - |
| PERSON_ID | ENROLID | - | - |
| VISIT_DETAIL_CONCEPT_ID | STDPLAC | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 9201 (Inpatient Visit). | *NOTE: The STDPLAC value in INPATIENT_SERVICES is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 |
| VISIT_DETAIL_START_DATE | SVCDATE | NULL | - |
| VISIT_DETAIL_START_DATETIME | SVCDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_END_DATE | TSVCDAT (See Logic column for exceptions) | If STDPLAC is blank, NULL, does not have a mapping or is equal to 02, 08, 17, 53, 57, 71, 72, 11, 01, 95, 12, 20, 49, 60, 15, 81, 42, 41, 14, 04, 18, 09, 03, 65 or 16 then set visit_detail_end_date equal to visit_detail_start_date. If STDPLAC is equal to 23, 24, 19, 25, 50, 62 and TSVCDAT - SVCDATE > 1 then set visit_detail_end_date equal to visit_detail_start_date If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 | - |
| VISIT_DETAIL_END_DATETIME | VISIT_DETAIL_END_DATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_TYPE_CONCEPT_ID | - | Set all to 32854 (Inpatient claim detail) | - |
| PROVIDER_ID | PROVID STDPROV | Look up the PROVIDER_ID from the PROVIDER table using PROVID as the PROVIDER_SOURCE_VALUE and STDPROV as the SPECIALITY_SOURCE_VALUE | If there is no associated PROVIDER_ID this should be NULL, not 0 |
| VISIT_DETAIL_SOURCE_VALUE | STDPLAC | - | |
| VISIT_DETAIL_SOURCE_CONCEPT_ID | STDPLAC | Use the Source-to-Source Query with the filter WHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_VOCABULARY_ID IN ('CMS Place of Service’) If no map is made, assign to 0. | NOTE: The STDPLAC value in INPATIENT_SERVICES is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. |
| ADMITTING_SOURCE_VALUE | - | NULL | - |
| ADMITTING_SOURCE_CONCEPT_ID | - | 0 | - |
| DISCHARGE_TO_SOURCE_VALUE | DSTATUS | - | |
| DISCHARGE_TO_CONCEPT_ID | DSTATUS | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('UB04 Pt dis status’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 0. | NOTE: The UB04 Pt dis status value in the OMOP Vocabulary is only one digit for the number 8 (though 1-7 and 9 are two digits). In the INPATIENT_SERVICES table these are all two digits, presented as 01, 02, etc. Please add a leading zero to 8 in the OMOP Vocabulary to make it 08 prior to mapping to make sure it is not erroneously set to zero. |
| PRECEDING_VISIT_DETAIL_ID | - | NULL | - |
| VISIT_DETAIL_PARENT_ID | - | NULL | - |
| VISIT_OCCURRENCE_ID | - | VISIT_OCCURRENCE.VISIT_OCCURRENCE_ID This is the VISIT_OCCURRENCE_ID for the VISIT_OCCURRENCE record that is the parent for the VISIT_DETAIL record | - |
Reading from FACILITY_HEADER
| Destination Field | Source field | Logic | Comment field |
|---|---|---|---|
| VISIT_DETAIL_ID | - | System generated. | - |
| PERSON_ID | ENROLID | - | |
| VISIT_DETAIL_CONCEPT_ID | STDPLAC | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 9202 (Outpatient). | NOTE: The STDPLAC value is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 |
| VISIT_DETAIL_START_DATE | SVCDATE | NULL | - |
| VISIT_DETAIL_START_DATETIME | SVCDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_END_DATE | TSVCDAT (See Logic column for exceptions) | If STDPLAC is blank, NULL, does not have a mapping or is equal to 02, 08, 17, 53, 57, 71, 72, 11, 01, 95, 12, 20, 49, 60, 15, 81, 42, 41, 14, 04, 18, 09, 03, 65 or 16 then set visit_detail_end_date equal to visit_detail_start_date. If STDPLAC is equal to 23, 24, 19, 25, 50, 62 and TSVCDAT - SVCDATE > 1 then set visit_detail_end_date equal to visit_detail_start_date If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 | - |
| VISIT_DETAIL_END_DATETIME | VISIT_DETAIL_END_DATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_TYPE_CONCEPT_ID | - | Set all to 32846 (Facility Claim Header) | - |
| PROVIDER_ID | PROVID STDPROV | Look up the PROVIDER_ID from the PROVIDER table using PROVID as the PROVIDER_SOURCE_VALUE and STDPROV as the SPECIALITY_SOURCE_VALUE | If there is no associated PROVIDER_ID this should be NULL, not 0 |
| CARE_SITE_ID | - | NULL | - |
| VISIT_DETAIL_SOURCE_VALUE | STPLAC | - | |
| VISIT_DETAIL_SOURCE_CONCEPT_ID | STDPLAC | Use the Source-to-Source Query with the filter WHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_VOCABULARY_ID IN ('CMS Place of Service’) If no map is made, assign to 0. | NOTE: The STDPLAC value in OUTPATIENT_SERVICES is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. |
| ADMITTING_SOURCE_VALUE | - | NULL | - |
| ADMITTING_SOURCE_CONCEPT_ID | - | 0 | - |
| DISCHARGE_TO_SOURCE_VALUE | DSTATUS | - | |
| DISCHARGE_TO_CONCEPT_ID | DSTATUS | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('UB04 Pt dis status’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 0. | NOTE: The UB04 Pt dis status value in the OMOP Vocabulary is only one digit for the number 8 (though 1-7 and 9 are two digits). In the FACILITY_HEADER table these are all two digits, presented as 01, 02, etc. Please add a leading zero to 8 in the OMOP Vocabulary to make it 08 prior to mapping to make sure it is not erroneously set to zero. |
| PRECEDING_VISIT_DETAIL_ID | - | NULL | - |
| VISIT_DETAIL_PARENT_ID | - | NULL | - |
| VISIT_OCCURRENCE_ID | - | VISIT_OCCURRENCE.VISIT_OCCURRENCE_ID This is the VISIT_OCCURRENCE_ID for the VISIT_OCCURRENCE record that is the parent for the VISIT_DETAIL record | - |
Reading from INPATIENT_ADMISSIONS
| Destination Field | Source field | Logic | Comment field |
|---|---|---|---|
| VISIT_DETAIL_ID | - | System generated. | - |
| PERSON_ID | ENROLID | - | - |
| VISIT_DETAIL_CONCEPT_ID | - | Set to 9201 (IP) for all records | |
| VISIT_DETAIL_START_DATE | ADMDATE | NULL | - |
| VISIT_DETAIL_START_DATETIME | ADMDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_END_DATE | DISDATE | NULL | - |
| VISIT_DETAIL_END_DATETIME | DISDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_TYPE_CONCEPT_ID | - | Set all to 32855 (Inpatient claim header) | - |
| PROVIDER_ID | NULL | - | |
| CARE_SITE_ID | - | NULL | - |
| VISIT_DETAIL_SOURCE_VALUE | - | Set all to ‘IP’ | - |
| VISIT_DETAIL_SOURCE_CONCEPT_ID | - | Set all to 0 | - |
| ADMITTING_SOURCE_VALUE | - | NULL | - |
| ADMITTING_SOURCE_CONCEPT_ID | - | 0 | - |
| DISCHARGE_TO_SOURCE_VALUE | DSTATUS | - | |
| DISCHARGE_TO_CONCEPT_ID | DSTATUS | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('UB04 Pt dis status’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 0. | NOTE: The UB04 Pt dis status value in the OMOP Vocabulary is only one digit for the number 8 (though 1-7 and 9 are two digits). In the INPATIENT_SERVICES table these are all two digits, presented as 01, 02, etc. Please add a leading zero to 8 in the OMOP Vocabulary to make it 08 prior to mapping to make sure it is not erroneously set to zero. |
| PRECEDING_VISIT_DETAIL_ID | - | NULL | - |
| VISIT_DETAIL_PARENT_ID | - | NULL | - |
| VISIT_OCCURRENCE_ID | - | VISIT_OCCURRENCE.VISIT_OCCURRENCE_ID This is the VISIT_OCCURRENCE_ID for the VISIT_OCCURRENCE record that is the parent for the VISIT_DETAIL record | - |
Reading from DRUG_CLAIMS
| Destination Field | Source field | Logic | Comment field |
|---|---|---|---|
| VISIT_DETAIL_ID | - | System generated. | - |
| PERSON_ID | ENROLID | - | - |
| VISIT_DETAIL_CONCEPT_ID | - | Set to 581458 (Pharmacy) | |
| VISIT_DETAIL_START_DATE | SVCDATE | NULL | - |
| VISIT_DETAIL_START_DATETIME | SVCDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_END_DATE | SVCDATE | NULL | - |
| VISIT_DETAIL_END_DATETIME | SVCDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_TYPE_CONCEPT_ID | - | Set all to 32869 (Pharmacy claim) | - |
| PROVIDER_ID | NULL | - | |
| CARE_SITE_ID | - | NULL | - |
| VISIT_DETAIL_SOURCE_VALUE | - | Set all to ‘Pharmacy’ | - |
| VISIT_DETAIL_SOURCE_CONCEPT_ID | - | Set all to 0 | - |
| ADMITTING_SOURCE_VALUE | - | NULL | - |
| ADMITTING_SOURCE_CONCEPT_ID | - | 0 | - |
| DISCHARGE_TO_SOURCE_VALUE | - | NULL | - |
| DISCHARGE_TO_CONCEPT_ID | - | 0 | - |
| PRECEDING_VISIT_DETAIL_ID | - | NULL | - |
| VISIT_DETAIL_PARENT_ID | - | NULL | - |
| VISIT_OCCURRENCE_ID | - | VISIT_OCCURRENCE.VISIT_OCCURRENCE_ID This is the VISIT_OCCURRENCE_ID for the VISIT_OCCURRENCE record that is the parent for the VISIT_DETAIL record | - |
Reading from LONG_TERM_CARE
| Destination Field | Source field | Logic | Comment field |
|---|---|---|---|
| VISIT_DETAIL_ID | - | System generated. | - |
| PERSON_ID | ENROLID | - | |
| VISIT_DETAIL_CONCEPT_ID | STDPLAC | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 42898160 (Non-hospital institution Visit). | NOTE: The STDPLAC value is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 |
| VISIT_DETAIL_START_DATE | SVCDATE | NULL | - |
| VISIT_DETAIL_START_DATETIME | SVCDATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_END_DATE | TSVCDAT (See Logic column for exceptions) | If STDPLAC is blank, NULL, does not have a mapping or is equal to 02, 08, 17, 53, 57, 71, 72, 11, 01, 95, 12, 20, 49, 60, 15, 81, 42, 41, 14, 04, 18, 09, 03, 65 or 16 then set visit_detail_end_date equal to visit_detail_start_date. If STDPLAC is equal to 23, 24, 19, 25, 50, 62 and TSVCDAT - SVCDATE > 1 then set visit_detail_end_date equal to visit_detail_start_date If STDPLAC = 22 and TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201 | - |
| VISIT_DETAIL_END_DATETIME | VISIT_DETAIL_END_DATE | - | Set time to 00:00:00. |
| VISIT_DETAIL_TYPE_CONCEPT_ID | - | Set all to 32844 (Facility Claim) | |
| PROVIDER_ID | PROVID STDPROV | Look up the PROVIDER_ID from the PROVIDER table using PROVID as the PROVIDER_SOURCE_VALUE and STDPROV as the SPECIALITY_SOURCE_VALUE | If there is no associated PROVIDER_ID this should be NULL, not 0 |
| CARE_SITE_ID | - | NULL | - |
| VISIT_DETAIL_SOURCE_VALUE | STPLAC | - | |
| VISIT_DETAIL_SOURCE_CONCEPT_ID | STDPLAC | Use the Source-to-Source Query with the filter WHERE SOURCE_VOCABULARY_ID IN ('CMS Place of Service’)AND TARGET_VOCABULARY_ID IN ('CMS Place of Service’) If no map is made, assign to 0. | NOTE: The STDPLAC value in OUTPATIENT_SERVICES is only one digit for the numbers 1-9. In the OMOP Vocabulary these are two digits, presented as 01, 02, etc. Please add a leading zero prior to mapping to make sure they are not erroneously set to zero. |
| ADMITTING_SOURCE_VALUE | - | NULL | - |
| ADMITTING_SOURCE_CONCEPT_ID | - | 0 | - |
| DISCHARGE_TO_SOURCE_VALUE | DSTATUS | - | |
| DISCHARGE_TO_CONCEPT_ID | DSTATUS | Use the Source-to-Standard Query with the filterWHERE SOURCE_VOCABULARY_ID IN ('UB04 Pt dis status’)AND TARGET_STANDARD_CONCEPT = 'S'If no map is made, assign to 0. | NOTE: The UB04 Pt dis status value in the OMOP Vocabulary is only one digit for the number 8 (though 1-7 and 9 are two digits). In the FACILITY_HEADER table these are all two digits, presented as 01, 02, etc. Please add a leading zero to 8 in the OMOP Vocabulary to make it 08 prior to mapping to make sure it is not erroneously set to zero. |
| PRECEDING_VISIT_DETAIL_ID | - | NULL | - |
| VISIT_DETAIL_PARENT_ID | - | NULL | - |
| VISIT_OCCURRENCE_ID | - | VISIT_OCCURRENCE.VISIT_OCCURRENCE_ID This is the VISIT_OCCURRENCE_ID for the VISIT_OCCURRENCE record that is the parent for the VISIT_DETAIL record | - |
Change Log
August 9, 2021
- Added 02, 08, 17, 53, 57, 71, 72, 65 to the list of STDPLAC where the visit_detail_end_date should be equal to the visit_detail_start_date
- Added 24, 19, 25, 50, 62 to the list of STDPLAC where if TSVCDAT - SVCDATE > 1 then set visit_detail_end_date equal to visit_detail_start_date
- Added logic stating if a record with STDPLAC 22 has TSVCDAT - SVCDATE > 1 then set VISIT_DETAIL_CONCEPT_ID to 9201
June 11, 2021
-
Fully updated the VISIT_DETAIL logic to include all claim lines from all pertinent tables.
-
Fixed all type concepts
-
Added VISIT_DETAIL_END_DATE logic to get rid of Outpatient visits > 1 day